Double Girder Crab Hoist

Twin Hook Models

MODEL NO	CAPACITY (Kg)	LIFTING SPEED (m/mm)	FALL	CLASS OF DUTY	MOTOR POWER (Kw)	CHAIN SIZE	HOOK CENTER DISTANCE (mm)
CA 2010T	2×500	8/12	1	2m / M5	1.5/0.37	7×21	1000-4000
	2×1000	4/1	2
CA 3216T	2×800	8/12	1		2.4/0.6	9×27
	2×1600	4/1	2

Lifting Safely in Sync

Our Twin Hook Electric Chain Hoist wasn’t designed for perfect conditions or clean, quiet labs. It was designed for busy factories, congested yards, and congested shop floors where time is of the essence, floor space is limited, and every lift needs to be accurate on the first try.

Because when you are lifting something that is wide, heavy, or odd-shaped and the clock is counting down, you don’t need complicated systems or a second operator. You just need an Industrial Chain Hoist with Twin Hooks that gets the job done. Every time. Without drama.

That’s what the twin-hook type Electric Chain Hoists are built for:

• Two hooks, powered by one motor – There’s no need for any syncing. No timing issues. Just one gearbox driving both hooks together, always level.
• Custom hook spacing – You tell us what you’re lifting. We’ll set the right distance to keep it steady.
• Compact and tough – Do you have low headroom or tight clearances? Our Twin Hook Chain Hoists are designed to fit tight spaces, handle tough environments, and work consistently.

Features That Make Your Lifting Easier

• Our Chain Hoists are CE certified for safety, so your team can operate with confidence.
• IP55-rated protection shields against dust and moisture — perfect for real-world factory conditions.
• Dual-speed control allows fast movement when speed matters, and slow precision when alignment is critical.
• Automatic overload protection prevents unsafe lifts before they become a problem.
• A hard powder-coated enclosure will not wear out, corrode, or get damaged under tough shop conditions.
• Using standard electrical components means repairs can be done easily, restoring the unit to service while keeping downtime to a minimum.
• The fully mechanical slipping clutch provides overload protection, giving you a backup plan to prevent sudden equipment failures.
• Need height? How about up to 12 metres with heavy loads – more than enough for tall space or deep-pit applications.
• Each Dual-Hook Chain Hoist operates on its own sprocket, giving you a smoother run while reducing wear and increasing chain life.
• With the rotary limit switches, you can position the hook where you want, it will stop at the engagement point with no over-travel and no stress on the equipment.

What Makes Electric Twin Hook Hoists So Special?

As the leading Twin Hook Electric Chain Hoist Manufacturers, our hoists have a unique flair and benefits.

• The synchronised dual-hook heavy lifting Chain Hoist ensures the load remains level throughout the operation.
• A single operator can manage both lifting points via one control, improving efficiency and reducing manpower.
• The even load distribution minimises stress on sensitive components and reduces the risk of damage.
• Integrated overload protection and controlled start-stop motion enhance operational safety.
• Effectively handles long, bulky, or asymmetrical items such as dies or machine bases.
• Faster, consistent lifting cycles help improve productivity and reduce operational delays.
• Compact, low-headroom design maximises lifting height in space-constrained environments.
• Balanced lifting minimises loads on support structures to increase the life of your crane or beam system.
• Simplified mechanical design with fewer components means lower once-in-service maintenance and reduced downtime.

Technology

1. Motor
2. Brake
3. Transmission
4. Slipping Clutch
5. Chain wheel
6. Chain
7. Unique Chain Guide
8. Forged Carbon Steel Hooks
9. Limit Switches

Specifications

Standard Specifications

Capacity Range (Kg)	2×500 to 2×1600
Classification	FEM Class – 2m
Lifting Speed	8/2 & 4/1 m/min
Cross Travel Speed	25/6 m/min
Power Supply	3 Phase, 380 – 415 V, 50Hz
Control	24 Volts , 50 Hz,(Contactor)
Chain	BS EN 818-7
Brake	Electromagnetic Brake with Double Side Brake Lining
Chain Falls	Single chain fall & Double Chain Fall
Protection	Hoist – IP55, Pendant – IP65
Safety Features	Overload & Over Travel Protection, Motor Temperature Control, Emergency Stop
Operating Conditions	-10°c to 45°c

Description

	MotorDesigned for tough working conditions.Single-speed and dual-speed models are available.Engineered with a motor fin, fan blade, and fan cover design that cools the motor and brake.A standard thermal protector is installed in the motor.
	BrakeDisc-type electromagnetic brake system for steady operation and long life.Smooth brake system that provides maximum and increased levels of safety.Asbestos-free brake linings with a long service life.Unique availability.Maintenance-free.Tested for Hoist’s lifetime.
	TransmissionHelical-toothed gear steps for quiet running.Precision machined for long life.Oil bath lubrication results in a quiet, smooth, and cool operation.
	Slipping ClutchSimple and precise adjustment.Maintenance-free and highly resistant to wear.Ease of servicing, thanks to comfortable access.Reliable protection against overloading.
	Chain wheelMade of hardened steel.Deep-groove pockets fully support the load chain during operation.Reduces vibration and chain wear.Ensures accurate vertical lifting every time.
	ChainHigh-strength, corrosion, and wear-resistant load chain.Grade DAT, super strength, zinc-plated load chain.Certified to BS-EN 818-7 standard.Uses unique technology to greatly increase resistance to fatigue and wear.
	Unique Chain GuideProvides quiet and smooth guiding of the chain.Easily replaceable without hoist disassembly.Heavy cast iron construction with improved wear resistance.
	Forged Carbon Steel HooksUnder excessive loads, it will open gradually and avoid fracture.Ball bearings produce smooth rotation.The bottom hook can swivel up to 360 degrees.Heavy-duty hook latches are standard.
	Limit SwitchesInterrupt motor power to prevent hook-over-travel and hazardous conditions such as chain kinking.